Back to top

2017 ShearWater 27 Carolina

Ft. Lauderdale, Florida

$119,000

2017 ShearWater Carolina Bay

PRICE DROP!! BEST PRICED ON THE MARKET

WE TAKE TRADES

FINANCING AVAILABLE 

**KEVLAR HULL**

This is a ONE OF A KIND ShearWater

Twin Yamaha F200 Motors 233 hours (wrapped black) Under Warranty Until 2023

10’ Blade Power Pole

Bob’s Machine Shop Double Jack plate

Swim Platform w/ Boarding Ladder

Fold Down Rear Seating

AGM Batteries

T-Top Misters

4 Live wells 1 Forty-five gal and 3 Nineteen gal

30 Rod Holders

3 Tackle Centers

Fresh Water Washdown (20 gal)

Raw Water Washdown

2 Simrad VHF’s

3 Simrad Multifunction Units 2 Twelve” and 1 Seven”

Fusion Stereo Head

Recessed Trim Tabs with Indicator

Sirius XM Radio and Weather

2nd Station with Full Controls

Taco Outrigger Bases

Lockable Rod Box, Head, and Dry Box Storage

Fish box Storage

Anchor Locker

36v 72” Shaft Minn Kota Ulterra Trolling Motor

Custom Heavy Duty Black powder Coated Ameritrail Aluminum Trailer

Every cup holder, rod holder and even the anchor locker on this boat was professionally plummed to not drain into the bilge    

Basic Boat Info

Price: $119,000
Make: ShearWater
Model: 27 Carolina
Year: 2017
Condition: Used
Category: Power
Construction: Fiberglass

Dimensions

Length: 27 ft
Length Overall: 31'2 ft
Beam: 8'6 ft
Min Draft: 1'3 ft

Engines / Speed

Engines: 2
Engine #1 Specs:
  • Make: Yamaha
  • Model: F200
  • Fuel: Unleaded
  • Engine Power: 200hp
  • Type: Outboard 4 Stroke
  • Year: 2017
  • Engine Hours: 233
Engine #2 Specs:
  • Make: Yamaha
  • Model: F200
  • Engine Power: 200hp
  • Type: Outboard 4 Stroke
  • Year: 2017
  • Engine Hours: 233
Total Engine Power: 400hp

Tanks

Fuel Tanks: 1
Fuel Tank Capacity: 130 gal
Water Tanks: 1
Water Tank Capacity: 20 gal

Other

Heads Count: 1
Boat Class: Center Consoles, Bay Boats, Saltwater Fishing

Contact

Reid Dressler
Yachts360

Office

Yachts360
1515 SE 17th Street Suite 129A
Fort Lauderdale, Florida, US, 33316
Tel:(954) 514-9900


Manufacturer Provided Description

The ShearWater® hull design is precisely produced utilizing the ShearWater® exclusive “HPI” double hull foam core injected process. The ShearWater® “HPI” process incorporates a structurally sound outer hull chemically bonded to a matching full length complete inner hull with high strength water proof closed cell foam structural flotation foam core injected under pressure between the two hulls. The outer hull is structurally sound without the addition of the inner hull. The 100% All composite outer hull is hand laminated utilizing fine finish exterior fiberglass matt, high strength structural biaxial fiberglass fabric, composite core material and a layer of Dupont Kevlar over the entire bottom for extreme strength and puncture resistance. The outer hull is structurally reinforced with hand laminated full-length composite stringers and keel. The high-density composite transom is reinforced with hand laminated composite knee braces. The totally sealed and filled double hull structure eliminates the possibility of water intrusion into the hull. One of the most important benefits of the advanced “HPI” technology is undoubtedly the extreme safety factor built into every boat. The benefits of the “HPI” process are further enhanced through the use of the ShearWater exclusive process of chemically bonding the deck to the double hull creating a solid unitized one-piece structure. The ShearWater® proprietary “HPI unitized construction” method is initially very expensive to put into production. The inner hull is complex and time consuming to create. The inner hull mold and the outer hull mold have to be exceptionally strong to withstand the high internal pressure created during the foam injection process. The “HPI” process requires additional manufacturing space, additional steps in the process, and demands that the deck and the hull remain in their molds much longer than the typical construction methods. The additional time in the mold has the benefit of allowing the exterior gelcoat and fiberglass laminate the necessary time to thoroughly cure. The additional curing time is one of the most important factors that contribute to the ShearWater® exclusive, exceptionally straight, brilliant, exterior gelcoat finish. This ShearWater® exclusive technology creates a strong, durable, flex-free, unitized structure that cuts through waves silently and smoothly to deliver a comfortable and confident true sense of security. The unitized “HPI” process reinforced with Dupont Kevlar produces products with such consistently high strength and durability that costly warranty repairs are virtually eliminated. Based upon fifteen years of trouble free experience with the “HPI” process, American Marine Sports, LLC. offers a limited lifetime hull warranty with total confidence.

Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Additional Contact Information

Contact:

Reid Dressler

(919) 634-8010

reid@yachts360.com


$
%
$
Disclaimer This calculator is intended solely for general informational purposes, and to provide a rough estimate based on the information you provide. You should not base your decision on this estimate alone.